| Products | Tools | Pneumatic | With Seal | Page
1 2 |
|
 |
A452 | |
Model
A452 is very high strap tension up to 8500 N / 1900 lbs. After tensioning,
the tool stops to tension, but no strap tension every is lost (free
wheeling system). For safety reasons, the strap tension can be released
at any time by pressing the black safety push button. The rugged
tool permits a high strap tension and is particularly suitable for
applications in the steel- and steel processing industries. |
||
 |
A461 | |
Pneumatic
single hand sealer for a perfect double notch upcut joint. The double
notch seal guarantees a minimum breaking strength of 75%. The seal-safe
mechanism avoids faulty seal joints by incorrect operation of the
sealer. Suitable for regular duty and high tensile strapping. Weight
: 4.2 kg (9.3 lbs) |
||
 |
A480 | |
Pneumatically
powered tensioning and sealing tool for a single notch seal joint
using overlap pusher type seals. May be used for all regular duty
and high tensile straps. Ideal tool for strapping of tubes, wire
coils, rods and bundles of all kinds as well as for curved or irregularly
shaped packages. Available in two different tension versions. The
tool may but does not have to be suspended. Weight
: 4.2 kg (9.3 lbs) |
||
 |
A482 | |
The
only tool of its kind that does not require any suspension thanks
to its limited weight of 6.5 kg (14.3 lbs) only. It permits the
use of regular duty and high tensile strap with a maximum thickness
of 0.90 mm (.035"). The double notch upcut seal joint guarantees
an adequate seal-efficiency. In cases where in spite of the low
weight of the tool it is advantageous to suspend it, special suspension-brackets
can be supplied. Weight
: 6.5 kg (14.3 lbs)
|
||
| . | ||
 |
 |
 |
 |
 |
 |
 |
 |